Weller WR 3M Manuel d'utilisateur télécharger pdf (Page 9)

WR 3M Page 9 of 21

ENFRITESPTNLSVDKFIGRTRCZPLHUSKSLEELVLT

2 s ➾ Menu 1

4 s ➾ Menu 2

1x ➾ ON/OFF

2. The current air flow in percentage is shown in the display for

approximately 2 seconds.

3. Set the desired flow by Depressing the UP or DOWN Scroll Key.

6.4 Switching the Vacuum Pick-up Pump ON/OFF

Z Depress the Pick-Up Radio Button.

The pump is switched on or off, depending on the initial state. In

switched-on mode, the LED (8) next to the Pick-Up Radio Button

lights up green.

Note

The vacuum pump is not designed for continuous operation. (60

Seconds On, 30 Seconds Off). To protect itself, the pump

switches off automatically after 5 minutes of continuous operation.

6.5 Soldering and Desoldering

Z Perform the Soldering / Desoldering work in accordance with the

operating instructions of your connected soldering tool.

7 Special Functions

The special functions are divided into 2 menu levels:

− Menu 1 with setting options for Standby temperature, temperature

deactivation (Setback), automatic switch-off time (AUTO-OFF),

temperature Offset, Window function, Degrees °F / °C conversion,

switch-on time (On Time) for hot-air pencil, vacuum OFF delay

(VAC OFF), vacuum ON delay (VAC ON) and Lock function.

− Menu 2 with setting options for Station Desoldering vacuum level,

ID code, Factory Control Check (FCC), and Pick-Up vacuum level

(%).

Selecting Menu 1 Special Functions

Special functions Navigation

STANDBY

SETBACK

AUTO OFF

OFFSET

WINDOW

°F / °C

ON TIME

VAC OFF

VAC ON

↑ ┌ 1 ┐

↓ ┌ 2 ┐

EXIT ┌ 3 ┐

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Commentaires sur ces manuels

Pas de commentaire

Weller WR 3M Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Weller WR 3M